TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 132
port rate-limit, port rate-limit disable ingress
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Example Enable the Broadcast Control function for port5 and specify the rate as 128kbps: TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# storm-control bc-status enable rate 128k port rate-limit Description The port rate-limit command is used to configure the Rate Limit for an Ethernet port. To disable the Rate Limit, please use no port rate-limit command. Syntax port rate-limit [ ingress ingress-rate ] [egress egress-rate ] no port rate-limit Parameter ingress-rate -- Configure the bandwidth for receiving packets on the port, and the system will automatically select integral multiple of 64Kbps that closest to the rate you entered as the real Ingress rate. egress-rate -- Configure the bandwidth for sending packets on the port, and the system will automatically select integral multiple of 64Kbps that closest to the rate you entered as the real Engress rate. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the ingress-rate as 1Mbps and egress-rate as 10Mbps for port5: TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# port rate-limit ingress 1024 egress 10240 port rate-limit disable ingress Description The port rate-limit disable ingress command is used to disable the ingress-rate limit. Syntax port rate-limit disable ingress 120