TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 173
igmp-snooping vlan-config-add
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Syntax igmp-snooping config status {disable | enable} fast-leave {disable | enable} no igmp-snooping config Parameter status -- Enable/ Disable IGMP Snooping for the desired port. fast-leave -- Enable/ Disable Fast Leave feature for the desired port. If Fast Leave is enabled for a port, the switch will immediately remove this port from the multicast group upon receiving IGMP leave messages. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable IGMP Snooping and Fast Leave function for port 5: TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# igmp-snooping config status enable fast-leave enable igmp-snooping vlan-config-add Description The igmp-snooping vlan-config-add command is used to configure IGMP Snooping parameters for individual VLANs. To delete the corresponding configuration for the certain VLAN, please use no igmp-snooping vlan-config-add command. Multicast groups established by IGMP Snooping are based on VLANs. You can configure different IGMP parameters for different VLANs. Syntax igmp-snooping vlan-config-add {vlan-id} [rtime router-time] [mtime member-time] [ltime leave-time] [rport router-port] no igmp-snooping vlan-config-add {vlan-id} Parameter vlan-id -- The ID of the VLAN desired to enable IGMP Snooping, ranging from 1 to 4094. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 300. 161