TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 212
lldp admin-status
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
to Tx&Rx (or Tx_Only), the fast start mechanism will be enabled, that is, the transmit interval will be shorten to a second, and several LLDPDUs will be sent out (the number of LLDPDUs equals this parameter). The default value is 3. Command Mode Global Configuration Mode Example Specify the Transmit Interval of LLDPDU as 45 seconds and Trap message to NMS as 120 seconds: TP-LINK(config)# lldp timer tx-interval 45 TP-LINK(config)# lldp timer notify-interval 120 lldp admin-status Description The lldp admin-status command is used to configure the port's LLDP operating mode. To return to the default configuration, please use no lldp admin-status command. Syntax lldp admin-status { disable | tx | rx | txrx } no lldp admin-status Parameter disable -- Neither transmit nor receive LLDP frames. tx -- Only transmit LLDP frames. rx -- Only receive LLDP frames without sending. txrx -- Transmit and receive LLDP frames. By default, the LLDP operating mode of all ports is "txrx". Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the LLDP operating mode as "tx" for port 6: TP-LINK(config)# interface ethernet 6 TP-LINK(config-if)# lldp admin-status tx 200