Home » TP-Link Manuals » Hubs & Switches » TP-Link TL-SL2218 » Manual Viewer

TP-Link TL-SL2218 TL-SL2218 V1 User Guide - Page 46

Dynamic Address, Static Address Table, Switching, MAC Address

Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

¾ Static Address Table Select: Select the entry to delete or modify the corresponding port number. It is multi-optional. MAC Address: Displays the static MAC Address. VLAN ID: Displays the corresponding VLAN ID of the MAC address. Port: Displays the corresponding Port number of the MAC address. Here you can modify the port number to which the MAC address is bound. The new port should be in the same VLAN. Type: Displays the Type of the MAC address. Aging Status: Displays the Aging Status of the MAC address. Note: 1. If the corresponding port number of the MAC address is not correct, or the connected port (or the device) has been changed, the switch can not be forward the packets correctly. Please reset the static address entry appropriately. 2. If the MAC address of a device has been added to the Static Address Table, connecting the device to another port will cause its address not to be recognized dynamically by the switch. Therefore, please ensure the entries in the Static Address Table are correct and valid. 3. The MAC address in the Static Address Table can not be added to the Filtering Address Table or bound to a port dynamically. 5.4.3 Dynamic Address The dynamic address can be generated by the auto-learning mechanism of the switch. The Dynamic Address Table can update automatically by auto-learning or the MAC address aging out mechanism. To fully utilize the MAC address table, which has a limited capacity, the switch adopts an aging mechanism for updating the table. That is, the switch removes the MAC address entries related to a network device if no packet is received from the device within the aging time. On this page, you can configure the dynamic MAC address entry. Choose the menu Switching→MAC Address→Dynamic Address to load the following page. 39

Section	Page
Package Contents	8
Chapter 1 About this Guide	9
1.1 Intended Readers	9
1.2 Conventions	9
1.3 Overview of This Guide	9
Chapter 2 Introduction	12
2.1 Overview of the Switch	12
2.2 Main Features	12
2.3 Appearance Description	12
2.3.1 Front Panel	12
2.3.2 Rear Panel	14
Chapter 3 Login to the Switch	15
3.1 Login	15
3.2 Configuration	15
Chapter 4 System	17
4.1 System Info	17
4.1.1 System Summary	17
4.1.2 Device Description	19
4.1.3 System Time	20
4.1.4 Daylight Saving Time	20
4.1.5 System IP	22
4.2 User Management	23
4.2.1 User Table	23
4.2.2 User Config	23
4.3 System Tools	25
4.3.1 Config Restore	25
4.3.2 Config Backup	25
4.3.3 Firmware Upgrade	26
4.3.4 System Reboot	27
4.3.5 System Reset	27
4.4 Access Security	27
Chapter 5 Switching	30
5.1 Port	30
5.1.1 Port Config	30
5.1.2 Port Mirror	31
5.1.3 Port Security	34
5.1.4 Port Isolation	36
5.2 LAG	37
5.2.1 LAG Table	37
5.2.2 Static LAG	39
5.3 Traffic Monitor	40
5.3.1 Traffic Summary	40
5.3.2 Traffic Statistics	41
5.4 MAC Address	43
5.4.1 Address Table	43
5.4.2 Static Address	45
5.4.3 Dynamic Address	46
5.4.4 Filtering Address	48
Chapter 6 VLAN	50
6.1 802.1Q VLAN	51
6.1.1 VLAN Config	53
6.1.2 Port Config	55
6.2 Application Example for 802.1Q VLAN	57
Chapter 7 Spanning Tree	59
7.1 STP Config	64
7.1.1 STP Config	64
7.1.2 STP Summary	66
7.2 Port Config	67
7.3 MSTP Instance	69
7.3.1 Region Config	69
7.3.2 Instance Config	70
7.3.3 Instance Port Config	71
7.4 STP Security	73
7.4.1 Port Protect	73
7.4.2 TC Protect	76
7.5 Application Example for STP Function	76
Chapter 8 Multicast	80
8.1 IGMP Snooping	82
8.1.1 Snooping Config	83
8.1.2 Port Config	84
8.1.3 VLAN Config	85
8.1.4 Multicast VLAN	87
8.2 Multicast IP	90
8.2.1 Multicast IP Table	91
8.2.2 Static Multicast IP	91
8.3 Multicast Filter	92
8.3.1 IP-Range	93
8.3.2 Port Filter	94
8.4 Packet Statistics	95
Chapter 9 QoS	97
9.1 DiffServ	100
9.1.1 Port Priority	100
9.1.2 802.1P Priority	101
9.1.3 DSCP Priority	102
9.1.4 Schedule Mode	104
9.2 Bandwidth Control	105
9.2.1 Rate Limit	105
9.2.2 Storm Control	107
Chapter 10 SNMP	109
10.1 SNMP Config	111
10.1.1 Global Config	111
10.1.2 SNMP View	112
10.1.3 SNMP Group	113
10.1.4 SNMP User	115
10.1.5 SNMP Community	116
10.2 Notification	118
10.3 RMON	120
10.3.1 History Control	121
10.3.2 Event Config	122
10.3.3 Alarm Config	123
Chapter 11 Maintenance	125
11.1 System Monitor	125
11.1.1 CPU Monitor	125
11.1.2 Memory Monitor	126
11.2 Log	127
11.2.1 Log Table	128
11.2.2 Local Log	129
11.2.3 Remote Log	129
11.2.4 Backup Log	130
11.3 Device Diagnostics	131
11.3.1 Cable Test	131
11.3.2 Loopback	132
11.4 Network Diagnostics	133
11.4.1 Ping	133
11.4.2 Tracert	134
Appendix A: Specifications	135
Appendix B: Configuring the PCs	136

Match case Limit results 1 per page

Static Address Table

Select:

Select the entry to delete or modify the corresponding port number. It

is multi-optional.

MAC Address:

Displays the static MAC Address.

VLAN ID:

Displays the corresponding VLAN ID of the MAC address.

Port:

Displays the corresponding Port number of the MAC address. Here

you can modify the port number to which the MAC address is bound.

The new port should be in the same VLAN.

Type:

Displays the Type of the MAC address.

Aging Status:

Displays the Aging Status of the MAC address.

Note:

If the corresponding port number of the MAC address is not correct, or the connected port (or

the device) has been changed, the switch can not be forward the packets correctly. Please

reset the static address entry appropriately.

If the MAC address of a device has been added to the Static Address Table, connecting the

device to another port will cause its address not to be recognized dynamically by the switch.

Therefore, please ensure the entries in the Static Address Table are correct and valid.

The MAC address in the Static Address Table can not be added to the Filtering Address Table

or bound to a port dynamically.

5.4.3 Dynamic Address

The dynamic address can be generated by the auto-learning mechanism of the switch. The

Dynamic Address Table can update automatically by auto-learning or the MAC address aging out

mechanism.

To fully utilize the MAC address table, which has a limited capacity, the switch adopts an aging

mechanism for updating the table. That is, the switch removes the MAC address entries related to

a network device if no packet is received from the device within the aging time.

On this page, you can configure the dynamic MAC address entry.

Choose the menu

Switching

→

MAC Address

→

Dynamic Address

to load the following page.