TP-Link TL-SL2218 TL-SL2218 V1 User Guide - Page 86
VLAN ID, Router Port Time, Leave Time, Static Router Port, VLAN ID Select, Select, Multicast
View all TP-Link TL-SL2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page. Figure 8-6 VLAN Config The following entries are displayed on this screen: ¾ VLAN Config VLAN ID: Enter the VLAN ID to enable IGMP Snooping for the desired VLAN. Router Port Time: Specify the aging time of the router port. Within this time, if the switch doesn't receive IGMP query message from the router port, it will consider this port is not a router port any more. Member Port Time: Specify the aging time of the member port. Within this time, if the switch doesn't receive IGMP report message from the member port, it will consider this port is not a member port any more. Leave Time: Specify the interval between the switch receiving a leave message from a host and the switch removing the host from the multicast groups. Static Router Port: Select the static router port which is mainly used in the network with stable topology. ¾ VLAN Table VLAN ID Select: Click the Select button to quick-select the corresponding VLAN ID based on the ID number you entered. Select: Select the desired VLAN ID for configuration. It is multi-optional. VLAN ID: Displays the VLAN ID. Router Port Time: Displays the router port time of the VLAN. 79