TP-Link TL-WDR3500 TL-WDR3500 V1 User Guide 1910010836 - Page 24

TL-WDR3500, IP Address, Subnet Mask, Default Gateway, Primary, Secondary DNS

Get TP-Link TL-WDR3500 PDF manuals and user guides View all TP-Link TL-WDR3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

TL-WDR3500 N600 Wireless Dual Band Router 3) If the connection type detected is Static IP, the next screen will appear as shown in Figure 3-10. Configure the following parameters and then click Next to continue. Figure 3-10 Quick Setup - Static IP  IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Your ISP will provide you with the IP address you need to enter here. Enter the IP address into the field.  Subnet Mask - The Subnet Mask is used for the WAN IP address. Your IPS will provide you with the subnet mask which is usually 255.255.255.0.  Default Gateway - Your ISP will provide you with the Gateway address which is the ISP server's address. Enter the gateway IP address into the box if required.  Primary DNS - Enter the DNS Server IP address into the box if required.  Secondary DNS - If your ISP provides another DNS server, enter it into this field. 5. After finishing WAN Connection Type selection, the Dual Band Selection page will appear as shown in Figure 3-11. Here we choose "Concurrently with 2.4GHz and 5GHz (802.11a/b/g/n)" for introduction. Click Next to continue. Figure 3-11 Quick Setup - Dual Band Selection  2.4GHz - You can use the 2.4GHz band to connect to many classic wireless devices like gaming consoles, laptops, DVRs, ect. - 14 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
TL-WDR3500
N600 Wireless Dual Band Router
- 14 -
3)
If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-10. Configure the following parameters and then click
Next
to continue.
Figure 3-10 Quick Setup - Static IP
IP Address -
This is the WAN IP address as seen by external users on the Internet
(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
Subnet Mask -
The Subnet Mask is used for the WAN IP address. Your IPS will provide
you with the subnet mask which is usually 255.255.255.0.
Default Gateway -
Your ISP will provide you with the Gateway address which is the ISP
server’s address.
Enter the gateway IP address into the box if required.
Primary
DNS -
Enter the DNS Server IP address into the box if required.
Secondary DNS -
If your ISP provides another DNS server, enter it into this field.
5.
After finishing WAN Connection Type selection, the Dual Band Selection page will appear as
shown in Figure 3-11. Here we choose “Concurrently with 2.4GHz and 5GHz (802.11a/b/g/n)”
for introduction. Click
Next
to continue.
Figure 3-11 Quick Setup – Dual Band Selection
2.4GHz
- You can use the 2.4GHz band to connect to many classic wireless devices like
gaming consoles, laptops, DVRs, ect.