TP-Link TL-WDR3500 TL-WDR3500 V1 User Guide 1910010836 - Page 40

LAN, 4.4.3 MAC Clone, TL-WDR3500, Network, MAC Address, Subnet Mask, MAC Clone - reset

Get TP-Link TL-WDR3500 PDF manuals and user guides View all TP-Link TL-WDR3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

TL-WDR3500 N600 Wireless Dual Band Router  Static IP - Connections which use static IP address assignment. The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 4.4.2 LAN Choose menu "Network → LAN", you can configure the IP parameters of the LAN on the screen as below. Figure 4-10 LAN  MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed.  IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.0.1).  Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.  Note: 1) If you change the IP Address of LAN, you must use the new IP Address to log in the Router. 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time，while the Virtual Server and DMZ Host will not take effect until they are re-configured. 4.4.3 MAC Clone Choose menu "Network → MAC Clone", you can configure the MAC address of the WAN on the screen below, Figure 4-11: Figure 4-11 MAC Address Clone - 30 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
TL-WDR3500
N600 Wireless Dual Band Router
- 30 -
Static IP
-
Connections which use static IP address assignment.
The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one
of these protocols, then you must configure your connection manually.
4.4.2
LAN
Choose menu “
Network
→
LAN
”, you can configure the IP parameters of the LAN on the screen
as below.
Figure 4-10 LAN
MAC Address
-
The physical address of the Router, as seen from the LAN. The value can't
be changed.
IP Address -
Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.0.1).
Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Note:
1)
If you change the IP Address of LAN, you must use the new IP Address to log in the Router.
2)
If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time
，
while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
4.4.3
MAC Clone
Choose menu “
Network
→
MAC Clone
”, you can configure the MAC address of the WAN on
the screen below, Figure 4-11:
Figure 4-11 MAC Address Clone