TP-Link TL-WDR3500 TL-WDR3500 V1 User Guide 1910010836 - Page 27
TL-WDR3500, Wireless Radio, Wireless Network Name, Region, 11a only, 11n only, 11an mixed
View all TP-Link TL-WDR3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
TL-WDR3500 N600 Wireless Dual Band Router Figure 3-13 Quick Setup - Wireless Wireless Radio - Choose from the drop-down list to enable or disable the wireless radio. Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of up to 32 characters. The same name must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_5GHz_XXXXXX. This value is case-sensitive. For example, TEST is NOT the same as test. Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. Note: Limited by local law regulations, version for North America does not have region selection option. Band - This field displayed the operating frequency being configured. Mode - This field determines the wireless mode which the Router works on. 11a only - Select if all of your wireless clients are 802.11a. 11n only- Select only if all of your wireless clients are 802.11n. 11an mixed - Select if you are using both 802.11a and 802.11n wireless clients. - 17 -