TP-Link TL-WDR3500 TL-WDR3500 V1 User Guide 1910010836 - Page 59

Wireless Security, Connect successfully

Get TP-Link TL-WDR3500 PDF manuals and user guides View all TP-Link TL-WDR3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

TL-WDR3500 N600 Wireless Dual Band Router Use this method if your client device does not have the WPS button, but has a WPS PIN number. Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-31, then Figure 4-34 will appear. Figure 4-34 Add A New Device Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: "Connect successfully" will appear on the screen of Figure 4-34, which means the client device has successfully connected to the Router. III. Enter the Router's PIN on your client device Use this method if your client device asks for the Router's PIN number. Step 1: On the client device, enter the PIN number listed on the Router's WPS screen, shown in Figure 4-31 (It is also labeled on the bottom of the Router). Step 2: The WPS LED flashes for two minutes during the WPS process. Step 3: When the WPS LED is on, the client device has successfully connected to the Router. Step 4: Refer back to your client device or its documentation for further instructions.  Note: 1) The WPS LED on the Router will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS. 4.7.3 Wireless Security Choose menu "Wireless 5GHz → Wireless Security", you can configure the security settings of your wireless network. There are five wireless security modes supported by the Router: WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, and WEP. - 49 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
TL-WDR3500
N600 Wireless Dual Band Router
- 49 -
Use this method if your client device does not have the WPS button, but has a WPS PIN number.
Step 1:
Keep the default WPS status as
Enabled
and click the
Add device
button in Figure 4-31,
then Figure 4-34 will appear.
Figure 4-34 Add A New Device
Step 2:
Enter the PIN number from the client device in the field on the above WPS screen. Then
click
Connect
button.
Step 3:
“
Connect successfully
” will appear on the screen of Figure 4-34, which means the client
device has successfully connected to the Router.
III. Enter the Router’s PIN on your client device
Use this method if your client device asks for the Router’s PIN number.
Step 1:
On the client device, enter the PIN number listed on the Router’s WPS screen, shown in
Figure 4-31 (It is also labeled on the bottom of the Router).
Step 2:
The WPS LED flashes for two minutes during the WPS process.
Step 3:
When the WPS LED is on, the client device has successfully connected to the Router.
Step 4:
Refer back to your client device or its documentation for further instructions.
Note:
1)
The WPS LED on the Router will light green for five minutes if the device has been
successfully added to the network.
2)
The WPS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
4.7.3
Wireless Security
Choose menu “
Wireless 5GHz
→
Wireless Security
”, you can configure the security settings of
your wireless network.
There are five wireless security modes supported by the Router: WPA-Personal, WPA2-Personal,
WPA-Enterprise, WPA2-Enterprise, and WEP.