TP-Link TL-WDR3600 User Manual - Page 27

TL-WDR3600, Channel, Wireless Security, Disable Security, Enable Security WPA-PSK/WPA2-PSK, No Change - change password

Get TP-Link TL-WDR3600 PDF manuals and user guides View all TP-Link TL-WDR3600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

TL-WDR3600 N600 Wireless Dual Band Gigabit Router ¾ Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select "Auto", then the AP will select the best channel automatically. ¾ Wireless Security z Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. z Enable Security (WPA-PSK/WPA2-PSK) - It's selected by default, with the default PSK password the same as the default PIN code. z No Change - If you chose this option, wireless security configuration will not change! These settings are only for basic wireless parameters. For advanced settings, please refer to 4.7 Wireless 5GHz. 8. Then you will see the Finish page. ¾ If you don't make any change on the Wireless page, you will see the Finish page as shown in Figure 3-14. Click the Finish button to finish the Quick Setup. Figure 3-14 Quick Setup - Finish ¾ If there is anything changed on the Wireless page, you will see the Finish page as shown in Figure 3-15. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup. Figure 3-15 Quick Setup - Finish - 18 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 18 -
¾
Channel -
This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select “Auto”, then the AP will select the best
channel automatically.
¾
Wireless Security
z
Disable Security -
The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without
encryption.
z
Enable Security (WPA-PSK/WPA2-PSK) –
It’s selected by default, with the
default PSK password the same as the default PIN code.
z
No Change -
If you chose this option, wireless security configuration will not
change!
These settings are only for basic wireless parameters. For advanced settings, please refer to
4.7 Wireless 5GHz
.
8.
Then you will see the
Finish
page.
¾
If you don’t make any change on the
Wireless
page, you will see the
Finish
page as
shown in Figure 3-14. Click the
Finish
button to finish the
Quick Setup
.
Figure 3-14 Quick Setup - Finish
¾
If there is anything changed on the
Wireless
page, you will see the
Finish
page as
shown in Figure 3-15. Click the
Reboot
button to make your wireless configuration take
effect and finish the
Quick Setup
.
Figure 3-15 Quick Setup – Finish