TP-Link TL-WDR3600 User Manual - Page 78
NAT, 4.11 Forwarding, 4.11.1 Virtual Servers - port forwarding
View all TP-Link TL-WDR3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
TL-WDR3600 N600 Wireless Dual Band Gigabit Router 4.10 NAT Choose "NAT", and you can enable or disable the NAT function. 4.11 Forwarding Figure 4-60 The Forwarding menu Figure 4-61 The Forwarding menu There are four submenus under the Forwarding menu (shown in Figure 4-61): Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function. 4.11.1 Virtual Servers Choose menu "Forwarding→Virtual Servers", and then you can view and add virtual servers in the next screen (shown in Figure 4-62). Virtual servers can be used for setting up public services on your LAN. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP address because its IP address may change when using the DHCP function. - 69 -