TP-Link TL-WDR3600 User Manual - Page 30
Quick Setup, 4.4 Network, 4.4.1 WAN, TL-WDR3600, Clone, Network, Dynamic IP
View all TP-Link TL-WDR3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
TL-WDR3600 N600 Wireless Dual Band Gigabit Router 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide. 4.4 Network Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): WAN, LAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. 4.4.1 WAN Choose menu "Network → WAN", you can configure the IP parameters of the WAN on the screen below. 1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP parameters from your ISP. You can see the page as follows (Figure 4-3): Figure 4-3 WAN - Dynamic IP - 21 -
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 21 -
4.3
Quick Setup
Please refer to
3.2 Quick Installation Guide
.
4.4
Network
Figure 4-2 the Network menu
There are three submenus under the Network menu (shown in Figure 4-2):
WAN
,
LAN
and
MAC
Clone
. Click any of them, and you will be able to configure the corresponding function.
4.4.1
WAN
Choose menu “
Network
→
WAN
”, you can configure the IP parameters of the WAN on the
screen below.
1.
If your ISP provides the DHCP service, please choose
Dynamic IP
type,
and the Router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
4-3):
Figure 4-3 WAN – Dynamic IP