TP-Link TL-WR710N User Guide - Page 143

TL-WR710N 150Mbps Wireless N Mini Pocket Router ¾ Storage Authority - Choose Read and Write or Read Only from the drop-down list to assign access authority of Storage Sharing to the user. ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to discard the settings and just go to the media server configuration page. ) Note: Please restart the service for the new settings to take effect. If you cannot use the new user name and password to access the shares, press Windows logo + R to open the Run dialog box and type net use \\192.168.0.254 /delete /yes and press Enter. (192.168.0.254 is your router's LAN IP address. If the LAN IP of the modem connected with your router is 192.168.1.x, the default LAN IP of the router will automatically switch from 192.168.0.254 to 192.168.1.254 to avoid IP conflict; in this case, please try net use \\192.168.1.254 /delete / yes.) 5.10 System Tools Figure 5-33 The System Tools menu Choose menu "System Tools", and then you can see the submenus under the main menu: Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password, and System Log. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 5.10.1 Diagnostic Choose menu "System Tools → Diagnostic", and then you can transact Ping or Traceroute function to check connectivity of your network in the following screen. - 129 -