TP-Link TL-WR710N User Guide - Page 59
LAN
View all TP-Link TL-WR710N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TL-WR710N 150Mbps Wireless N Mini Pocket Router Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect until the connection is re-established. 4.6.3 LAN Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on the screen as below. Figure 4-17 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default: 192.168.0.254). ¾ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ¾ IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices in LAN can watch TV. ) Note: 1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router. 2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically,while the Virtual Server and DMZ Host will not take effect until they are re-configured. - 45 -