TP-Link TL-WR710N User Guide - Page 153
Network
View all TP-Link TL-WR710N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
TL-WR710N 150Mbps Wireless N Mini Pocket Router ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 6.5 Network Figure 6-4 the Network menu There is only one submenu under the Network menu (shown in Figure 6-4): LAN. 6.5.1 LAN Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on the screen as below. Figure 6-5 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can't be changed. ¾ Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP to config IP address manually. ¾ IP Address - Enter the IP address of your system in dotted-decimal notation (factory default - 192.168.0.254). ¾ Subnet Mask - An address code that determines the size of the network. Normally 255.255.255.0 is used as the subnet mask. ¾ IGMP Proxy - The Internet Group Management Protocol(IGMP) feature allows your devices in LAN can watch TV. ) Note: 1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router. 2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically,while the Virtual Server and DMZ Host will not take effect until they are re-configured. - 139 -