TP-Link TL-WR710N User Guide - Page 182
Wireless Settings
![]() |
View all TP-Link TL-WR710N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
TL-WR710N 150Mbps Wireless N Mini Pocket Router 3. When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled. 7.6 Wireless Figure 7-6 Wireless menu There are two submenus under the Wireless menu (shown in Figure 7-6): Wireless Settings and Wireless Security. Click any of them, and you will be able to configure the corresponding function. 7.6.1 Wireless Settings Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings for the wireless network on this page. Figure 7-7 Wireless Settings - Client ¾ Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS is enabled, all traffic from wired networks will be forwarded in the format of WDS frames consisting of four address fields. If WDS is disabled, three address frames are used. If your AP supports WDS well, please enable this option. ¾ Wireless Name of Root AP - Enter the SSID of AP that you want to access. ¾ MAC Address of Root AP - Enter the MAC address of AP that you want to access. ¾ Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. - 168 -
![](/manual_guide/products/tplink-tlwr710n-user-guide-9af65c1/182.png)