TP-Link TL-WR710N User Guide - Page 160
Wireless Advanced
View all TP-Link TL-WR710N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
TL-WR710N 150Mbps Wireless N Mini Pocket Router 4. Click the Add New... button. • Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field. • Enter wireless station A/B in the Description field. • Select Enabled in the Status pull-down list. • Click the Save button. • Click the Back button. The filtering rules that configured should be similar to the following list: 6.6.4 Wireless Advanced Choose menu "Wireless → Wireless Advanced", and then you can configure the advanced settings of your wireless network. Figure 6-13 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended. ¾ Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the Router to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100. ¾ RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the Router will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 2346. - 146 -