TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 110
Firmware Upgrade, Switch, Destination IP, Interval, Startup Delay, Fail Count, Support
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Chapter 5 Configure the Router in Access Point Mode • Switch- Enable or disable Ping Watch Dog. • Destination IP - The IP address of the target host where the Ping Watch Dog Utility is sending ping packets. • Interval - Time interval between two ping packets which are sent out continuously. • Startup Delay - Time delay before first ping packet is sent out when the router is restarted. • Fail Count - Upper limit of the ping packets the router can drop continuously. If this value is overrun, the router will restart automatically. 5. 7. 3. Firmware Upgrade TP-Link is dedicated to improving and richening the product features, giving users a better network experience. We will release the latest firmware at TP-Link official website. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 3. Go to System Tools > Firmware Upgrade. 4. Click Choose File to locate the downloaded firmware file, and click Upgrade. 103
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/110.png)