TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 35
Location, Mobile ISP, Username/Password, Authentication Type, Advance, MTU size in bytes
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 4 Configure the Router in Wireless Router Mode • Location - Please select the location where you are enjoying the 3G/4G service. • Mobile ISP - Please select the ISP providing the 3G/4G service. The router will automatically fill in the default Dial Number and APN of that ISP. • Username/Password - Enter the username and password provided by your ISP if any. • Authentication Type - Some ISPs require authentication to access the internet. Please select Auto or consult your ISP. • Auto - The router will have dynamic negotiation with the dialing server and the authentication type doesn't need to be specified. • PAP - Password Authentication Protocol. Select PAS if required by your ISP. • CHAP - Challenge Handshake Authentication Protocol. Select CHAP if required by your ISP. Click Advance to set advanced options. • MTU size (in bytes) - The typical MTU (Maximum Transmission Unit) size for 3G or 4G network is 1480 Bytes. • Echo request interval - Enter a time interval value between 0 and 120 (in seconds) for which the router requests Access Concentrator to echo at every interval. The default value is 30. 0 means no detection. 28
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/35.png)