TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 175

Chapter 8 Configure the Router in Hotspot Router Mode • Guest Network Isolation - If enabled, one guest can not communicate with another. • Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect. • Band Select - Select the wireless band 2.4GHz or 5GHz for the guest network. • Guest Network - Enable or disable the guest network . • Network Name - Enter a value of up to 32 characters. The same Name(SSID) must be assigned to all wireless devices in your guest network. • Max Guests number - Maximum guests (1-32). • Security - You can configure the security of the guest network here. • Access Time - You can also specify when or how long a guest device can access the internet. • Schedule - During this time the wireless stations could not access the guest network. • Timeout - If the countdown timer hits zero, the guest network will be closed. 8. 5. DHCP By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 168