TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 87
Status, Point Mode.
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 5 Configure the Router in Access Point Mode 5. 1. Status 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Status. You can view the current status information of the router in Access Point Mode. • Firmware Version - The version information of the router's firmware. • Hardware Version - The version information of the router's hardware. • LAN- This field displays the current settings of the LAN, and you can configure them on the Network > LAN page. • MAC Address - The physical address of the router. • IP Address - The LAN IP address of the router. • Subnet Mask - The subnet mask associated with the LAN IP address. 80
80
Chapter 5
Configure the Router in Access Point Mode
5. 1.
Status
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Status
. You can view the current status information of the router in Access
Point Mode.
•
Firmware Version
- The version information of the router’s firmware.
•
Hardware Version
- The version information of the router’s hardware.
•
LAN
- This field displays the current settings of the LAN, and you can configure them
on the
Network
>
LAN
page.
•
MAC Address
- The physical address of the router.
•
IP Address
- The LAN IP address of the router.
•
Subnet Mask
- The subnet mask associated with the LAN IP address.