TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 154
Reboot, 7. 7. 6. Password, and you can restart your router.
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Chapter 7 Configure the Router in Client Mode 7. 7. 5. Reboot 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Reboot, and you can restart your router. Some settings of the router will take effect only after rebooting, including: • Change the LAN IP address (system will reboot automatically). • Change the DHCP settings. • Change the operation mode. • Change the web management port. • Upgrade the firmware of the router (system will reboot automatically). • Restore the router to its factory defaults (system will reboot automatically). • Update the configuration with the file (system will reboot automatically). 7. 7. 6. Password 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Password, and you can change the factory default username and password of the router. It is strongly recommended that you change the default username and password of the router, for all users that try to access the router's web-based utility or Quick Setup will be prompted for the router's username and password. 147
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/154.png)