TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 31
BigPond Cable, IGMP Proxy
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 4 Configure the Router in Wireless Router Mode • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. • Use IP address specified by ISP - If your ISP does not automatically assign IP addresses to the router, please select Use IP address specified by ISP and enter the IP address provided by your ISP in dotted-decimal notation. • Set DNS server manually - If your ISP does not automatically assign DNS addresses to the router, please select Set DNS server manually and enter the IP address in dotteddecimal notation of your ISP's primary DNS server. If a secondary DNS server address is available, enter it as well. BigPond Cable If your ISP provides BigPond cable connection, please select BigPond Cable. • Username/Password - Enter the username and password provided by your ISP. These fields are case-sensitive. • Auth Server - Enter the authenticating server IP address or host name. • Auth Domain - Type in the domain suffix server name based on your location. • MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you change the default MTU size unless required by your ISP. • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. • Connection Mode • Always On - Connect automatically after the router is connected. • Connect on demand - In this mode, the internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be reestablished when you attempt to access the internet again. If you want to keep 24