TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 64

Chapter 4 Configure the Router in Wireless Router Mode • ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond the set value, the router will startup the blocking function immediately. • Enable UDP-FLOOD Filtering - Check the box to enable or disable this function. • UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond the set value, the router will startup the blocking function immediately. • Enable TCP-SYN-FLOOD Attack Filtering -Check the box to enable or disable this function. • TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is beyond the set value, the router will startup the blocking function immediately. • Forbid Ping Packet From WAN Port - The default setting is disabled. If enabled, the ping packet from the internet cannot access the router. • Forbid Ping Packet From LAN Port - The default setting is disabled. If enabled, the ping packet from LAN cannot access the router. This function can be used to defend against some viruses. 3. Click Save. 4. Click Blocked DoS Host List to display the DoS host table by blocking. 4. 8. 3. Local Management 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Security > Local Management, and you can block computers in LAN from accessing the router. For example, if you want to allow PCs with specific MAC addresses to access the router's web management page locally from inside the network, please follow the instructions below: 57