TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 138
Status
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Chapter 7 Configure the Router in Client Mode 7. 1. Status 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Status. You can view the current status information of the router in Client Mode. • Firmware Version - The version information of the router's firmware. • Hardware Version - The version information of the router's hardware. • LAN - This field displays the current settings of the LAN, and you can configure them on the Network > LAN page. • MAC Address - The physical address of the router. • IP Address - The LAN IP address of the router. • Subnet Mask - The subnet mask associated with the LAN IP address. 131
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/138.png)
131
Chapter 7
Configure the Router in Client Mode
7. 1.
Status
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Status
. You can view the current status information of the router in Client Mode.
•
Firmware Version
- The version information of the router’s firmware.
•
Hardware Version
- The version information of the router’s hardware.
•
LAN
- This field displays the current settings of the LAN, and you can configure them
on the
Network
>
LAN
page.
•
MAC Address
- The physical address of the router.
•
IP Address
- The LAN IP address of the router.
•
Subnet Mask
- The subnet mask associated with the LAN IP address.