TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 160
IP Address, Subnet Mask, Gateway, Primary/Secondary DNS Server, MTUBytes, IGMP Proxy
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Chapter 8 Configure the Router in Hotspot Router Mode • IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. • Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your ISP. Normally 255.255.255.0 is used as the subnet mask. • Gateway - Enter the gateway IP address in dotted-decimal notation provided by your ISP. • Primary/Secondary DNS Server - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. • MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you change the default MTU size unless required by your ISP. • IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by the ISP is IGMP techonology-based. PPPoE/Russia PPPoE If your ISP provides PPPoE connection, select PPPoE/Russia PPPoE. • PPP Username/Password - Enter the username and password provided by your ISP. These fields are case-sensitive. 153
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/160.png)