TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 82
Backup & Restore, 4. 16. 6. Reboot, Username, Password, IP Address, Subnet Mask
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 4 Configure the Router in Wireless Router Mode • The default Username: admin • The default Password: admin • The default IP Address: 192.168.0.1 • The default Subnet Mask: 255.255.255.0 4. 16. 5. Backup & Restore The configuration settings are stored as a configuration file in the router. You can backup the configuration file in your computer for future use and restore the router to the previous settings from the backup file when needed. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Backup & Restore. •• To backup configuration settings: Click Backup to save a copy of the current settings in your local computer. A ".bin" file of the current settings will be stored in your computer. •• To restore configuration settings: 1. Click Choose File to locate the backup configuration file stored in your computer, and click Restore. 2. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not power off or reset the router. 4. 16. 6. Reboot 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to System Tools > Reboot, and you can restart your router. 75
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/82.png)