TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 77
IPv6 WAN, Dynamic IPv6, Static IPv6, PPPoEv6, Advance
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 4 Configure the Router in Wireless Router Mode 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to IPv6 > IPv6 WAN. 3. Enable IPv6 and select the internet connection type provided by your ISP. Note: If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. 4. Fill in the blanks as required by different connection types. 1 ) Dynamic IPv6: the router will automatically get related parameters from your ISP. 2 ) Static IPv6: Fill in the IPv6 address, gateway (optional) and DNS servers (optional) and click Save. 3 ) PPPoEv6: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advance to input further information if your ISP requires. Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the PPPoE same session with IPv4 connection checkbox and manually enter the username and password for the IPv6 connection. 70
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/77.png)