TP-Link TL-WR902AC TL-WR902ACUS V3 User Guide - Page 121
Wireless Statistics, 6. 5. DHCP, 6. 5. 1. DHCP Settings, Enable WMM, Wireless 2.4GHz/5Ghz
![]() |
View all TP-Link TL-WR902AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 6 Configure the Router in Range Extender Mode • Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially. It is strongly recommended to enable this function. 6. 4. 5. Wireless Statistics 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Wireless 2.4GHz/5Ghz > Wireless Statistics to check the data packets sent and received by each client device connected to the router. • MAC Address - The MAC address of the connected wireless client. • Current Status - The running status of the connected wireless client. • Received Packets - Packets received by the wireless client. • Sent Packets - Packets sent by the wireless client. • SSID - SSID that the wireless client is connected to. 6. 5. DHCP By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 6. 5. 1. DHCP Settings 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to DHCP > DHCP Settings. 3. Specify DHCP server settings and click Save. 114
![](/manual_guide/products/tplink-tlwr902ac-tlwr902acus-v3-user-guide-3550c82/121.png)