TRENDnet TEW-811DRU User's Guide - Page 27

Additional wireless settings, Wireless 2.4GHz or 5GHz > Advanced

Get TRENDnet TEW-811DRU PDF manuals and user guides View all TRENDnet TEW-811DRU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

TRENDnet User's Guide Additional wireless settings Wireless (2.4GHz or 5GHz) > Advanced These settings are advanced options that can be configured to change advanced wireless broadcast specifications. It is recommended that these settings remain set to their default values unless you are knowledgeable about the effects of changing these values. Changing these settings incorrectly can degrade performance. • Beacon Interval: A beacon is a management frame used in wireless networks that transmitted periodically to announce the presence and provide information about the router's wireless network. The interval is the amount time between each beacon transmission. Default Value: 100 milliseconds (range: 25-1000) • DTIM: A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. • Fragment Threshold: Wireless frames can be divided into smaller units (fragments) to improve performance in the presence of RF interference and at the limits of RF coverage. Fragmentation will occur when frame size in bytes is greater than the Fragmentation Threshold. This setting should remain at its default value of 2346 bytes. Setting the Fragmentation value too low may result in poor performance. • RTS Threshold: The Request To Send (RTS) function is part of the networking protocol. A wireless device that needs to send data will send a RTS before sending the data in question. The destination wireless device will send a response called Clear to Send (CTS). The RTS Threshold defines the smallest data packet size allowed to initiate the RTS/CTS function. Default Value: 2347 (range: 1-2347) © Copyright 2013 TRENDnet. All Rights Reserved. TEW-811DRU • Short Preamble: Using a short (400ns) guard interval can increase throughput. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. Select the option that works best for your installation. • Xpress™ Technology: A frame bursting technology used to improve wireless performance. The feature will only work with other Xpress™ supported devices. It is recommended to leave this feature On. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-811DRU
27
Additional wireless settings
Wireless (2.4GHz or 5GHz) > Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
•
Beacon Interval:
A beacon is a management frame used in wireless networks
that transmitted periodically to announce the presence and provide
information about the router’s wireless network. The interval is the amount
time between each beacon transmission.
Default Value: 100 milliseconds (range: 25-1000)
•
DTIM:
A DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages. When the wireless router has
buffered broadcast or multicast messages for associated clients, it sends the
next DTIM with a DTIM Interval value. Wireless clients detect the beacons and
awaken to receive the broadcast and multicast messages. The default value is
1. Valid settings are between 1 and 255.
•
Fragment Threshold:
Wireless frames can be divided into smaller units
(fragments) to improve performance in the presence of RF interference and at
the limits of RF coverage. Fragmentation will occur when frame size in bytes is
greater than the Fragmentation Threshold. This setting should remain at its
default value of 2346 bytes. Setting the Fragmentation value too low may
result in poor performance.
•
RTS Threshold:
The Request To Send (RTS) function is part of the networking
protocol. A wireless device that needs to send data will send a RTS before
sending the data in question. The destination wireless device will send a
response called Clear to Send (CTS). The RTS Threshold defines the smallest
data packet size allowed to initiate the RTS/CTS function.
Default Value: 2347 (range: 1-2347)
•
Short Preamble:
Using a short (400ns) guard interval can increase throughput.
However, it can also increase error rate in some installations, due to increased
sensitivity to radio-frequency reflections. Select the option that works best for
your installation.
•
Xpress™ Technology:
A frame bursting technology used to improve wireless
performance. The feature will only work with other Xpress™ supported devices.
It is recommended to leave this feature On.