Toshiba Satellite A660-BT3G25X Maintenance Manual - Page 210
Installing the Fingerprint Scanner Bracket
View all Toshiba Satellite A660-BT3G25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Installing the Fingerprint Scanner Bracket 4 Replacement Procedures Install the fingerprint scanner bracket according to the following procedures. 1. Turn the logic upper assembly upside down. 2. Use your fingers to press and hold down the wings on either side of the fingerprint scanner bracket as shown in Figure 4.23. 3. Place the bottom edge of the fingerprint scanner bracket in the proper position. 4. Lower the top edge of the fingerprint scanner bracket and press down until it snaps into place. Satellite A660/ProA660 Series Maintenance Manual 4-35
4 Replacement Procedures
Satellite A660/ProA660 Series Maintenance Manual
4-35
Installing the Fingerprint Scanner Bracket
Install the fingerprint scanner bracket according to the following procedures.
1.
Turn the logic upper assembly upside down.
2.
Use your fingers to press and hold down the wings on either side of the fingerprint
scanner bracket as shown in Figure 4.23.
3.
Place the bottom edge of the fingerprint scanner bracket in the proper position.
4.
Lower the top edge of the fingerprint scanner bracket and press down until it snaps into
place.