Xerox XDM6325D-WU User Manual - Page 11
Proceed to Step 2: Install the Software., surface, it may stall when scanning from the Flatbed.
View all Xerox XDM6325D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation 5. Swing the input tray up until it snaps into place. 6. Plug the ADF cable into the ADF port on the back of the scanner. Make sure the cable is plugged in securely. The ADF will not work if the cable is loose or not plugged in. 7. Push the locking tab down to the unlocked position. NOTE: The locking tab protects the scanner's scan head by holding it securely in position. Lock the scanner when transporting it from one location to another, but remember to unlock it before scanning. The scanner will not scan when locked. 8. When you're finished assembling the scanner, place it on a level surface on your desk. If the scanner is on an uneven surface, it may stall when scanning from the Flatbed. 9. Proceed to "Step 2: Install the Software." 6 DocuMate 632 Scanner User's Guide