Xerox XDM6325D-WU User Manual - Page 68
Con Before Scan
View all Xerox XDM6325D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Scanning Configure Before Scan Choosing Configure Before Scan simply opens a scanning interface when you press or click a scan button. You can then use the interface to change the Resolution, Scan Mode, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the One Touch Properties window for that button. To Set Configure Before Scan: 1. Open the One Touch Properties window. 2. Using the arrows, choose the button that you want to set to configure before scanning. 3. Select the scan configuration Configure Before Scan. Click the arrows to select the button. Select Configure Before Scan. Right-click on Configure Before Scan to get the menu, and choose the interface to use for configuring. 4. Right-click on Configure Before Scan and choose an interface to use for configuring before scanning. Some interface options may not be available, based on the drivers you installed for your scanner. TWAIN-The TWAIN Interface opens for you to configure the scanning. See "Scanning with the TWAIN Interface" on page 82. WIA-The Windows Image Acquisition Interface (WIA) opens for you to configure the scanning (available on Windows XP or Windows Vista only). See "Scanning with the WIA Interface" on page 98. 5. Click OK or Apply on the One Touch Properties window. DocuMate 632 Scanner User's Guide 63