Yamaha AW16G Owner's Manual - Page 12
Connecting the AC adaptor, Turning the power on/off - hard drives
View all Yamaha AW16G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Before you start Connecting the AC adaptor When connecting the included AC adaptor (PA-300), you must first connect it to the DC IN jack of the AW16G, and then to the AC wall outlet. After connecting the AC adaptor to the AW16G, wrap the cable around the hook as shown in the diagram. This will prevent the cable from DC IN being accidentally pulled out, causing the AW16G to unexpectedly lose power. Turning the power on/off You must use the following procedure to switch the power of the AW16G between ON and STANDBY. If you fail to follow this procedure, the internal hard disk or your external monitor system may be damaged. ■ Turning the power on In a system that includes the AW16G, turn the power of each device on in the following order. 1 External devices such as audio sources and effect processors connected to the input/output jacks of the AW16G B The AW16G itself C The monitor system connected to the AW16G's output jacks 1 In the work navigate section located in the upper left of the top panel, press the [SONG] key several times to access the following SHUTDOWN page. 2 Press the [ENTER] key located in the middle right of the top panel. A popup window will ask you whether you want to save the current song. Before you turn on the power, make sure that the AC adaptor is firmly connected to the AW16G and to the AC outlet. If the power is disconnected while the AW16G is being used, the AW16G itself or the hard disk may be damaged. When you turn on the power of the AW16G, an opening screen will appear, and then the following screen will appear. ■ Turning the power off (shut down) In a system that includes the AW16G, turn the power of each device off in the following order. 1 The monitor system connected to the AW16G's output jacks B The AW16G itself C External devices such as audio sources and effect processors connected to the input/output jacks of the AW16G When turning off the power of the AW16G, you must perform the following "shut-down" procedure. 12 3 Using the CURSOR [ ]/[ ] keys located in the upper right of the top panel, move the cursor (the blinking area in the screen) to the YES button if you want to save the current song, or to the NO button if you do not want to save it. Then press the [ENTER] key. 4 When the "Now safe to turn off..." message appears, turn off the [POWER] switch located on the rear panel. If you turn off the power of the AW16G without performing the above shutdown procedure, not only will any unsaved changes be lost, but you also risk damaging the data on the hard disk, and damaging or drastically shortening the lifespan of the hard disk itself and the internal CD-RW drive. Please use caution. Tip! A small amount of electrical current is flowing even when the power is in STANDBY mode. If you will not be using the AW16G for an extended period of time, be sure to disconnect the AC adaptor from your AC outlet.