Yamaha DSP-AX1 Owner's Manual - Page 34

Basic Operation Basic Playback Selecting a Source INPUT SELECTOR V-AUX TAPE PHONO D-TV CBL/SAT TUNER MD CD VCR 1 VCR 2 VCR 3 LD DVD LD D-TV CBL/SAT VCR 1 VCR 2 VCR 3 V-AUX The selected source DVD MD TAPE TUNER CD PHONO 1 Select the source using INPUT SELECTOR, or press one of the input buttons on the remote control. • The current source is indicated on the front panel display with an arrow. • The current source name and input mode appear on the front panel display and the video monitor for a few seconds. Select this source: To reproduce the signal from this equipment. DVD DVD player LD LD player D-TV Digital TV or TV CBL/SAT Cable TV or Satellite tuner VCR 1 Video deck 1 VCR 2 Video deck 2 VCR 3 Video deck 3 V-AUX Other A/V equipment PHONO Turntable CD CD player TUNER AM/FM tuner TAPE TAPE deck MD MD recorder VOLUME + VOLUME - 2 Start playback (or select a broadcast station) on the source equipment. • Refer to the operation instructions for the equipment. 3 Adjust VOLUME (or VOLUME +/- on the remote control). Caution: • If the power of the equipment connected to the VCR 1, VCR 2, VCR 3, TAPE, and MD OUT jacks is turned off, reproduced sound may be distorted or the volume may be lowered. In these cases, turn on the equipment. s BGV (Back Ground Video) Function The BGV (Back Ground Video) function allows you to combine a video signal from a video source with a sound signal from an audio source. (For example, you can listen to classical music while you are watching a video.) Using the remote control, select a source from the video group, then select a source from the audio group. Use the input buttons on the remote control to make your selections. The BGV function does not work if you select the sources using INPUT SELECTOR on the front panel. 32