Yamaha DSP-AX1 Owner's Manual - Page 64

Advanced Operation % Remote Control Features Clearing Learned Functions, Macros, Renamed Displays, and Manufacturer Setups CLEAR 1 Press CLEAR using a ballpoint pen or similar object. TITLE 6CH INPUT % % SOURCE % DISPLAY MENU % SELECT SEARCH ! POWER REC / STOP ! ENTER % SOUND - CHAPTER + $ PAUSE * PLAY # $ For example, when DVD is selected as the source component. % 2 Press %/ to select the clear mode. The mode is shown in the window in the following order: (L: name of a component) Clears all learning functions of the component. Clears all learning functions of the main unit control area (see page 50). Clears all learning functions. Clears all macros. Clears all renamed displays in the display window. Clears all programmed functions including manufacturer code presets. This returns to the factory presets. CLEAR 3 Press and hold CLEAR again for about 3 seconds. • "C:NG" appears in the display window if the operation is unsuccessful. 4 Press CLEAR to confirm clearing. CLEAR • Once you clear a learned function or macro from a button, the button reverts to its factory preset function or macro. Notes: • If the remote control is without batteries for more than twenty minutes, or if worn out batteries remain in the unit, the contents of the memory may be cleared. When the memory is cleared, insert new batteries and program any acquired functions that may have been cleared. • "ERROR" appears in the display window for the following conditions: when pressing a button other than the cursor and ENTER; when pressing more than one button at once; and when one of MACRO ON/OFF, 10KEY/DSP, PARAMETER/SET MENU is switched to another position. 62