Yamaha DTX450K Owner's Manual - Page 20
Turning On the Drum Module, Auto Power-Off, Restoring the Default Settings (Factory Set)
View all Yamaha DTX450K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Up for Sound Turning On the Drum Module 1. If you have connected your drum module to other audio devices such as powered speakers, ensure that the volume on all other devices is turned down fully. 2. Press the [ ] (Standby/On) button. The drum module will turn on and its buttons will light up. Turning Off the Drum Module 1. If you have connected your drum module to other audio equipment, ensure that the volume on all other devices is turned down fully. 2. Press the [ ] (Standby/On) button. The drum module will turn off and all button lights will go out. NOTICE • In certain modes of operation, the Auto Power-Off function will not turn off the drum module when the set time has elapsed. We recommend, therefore, that you always turn off the drum module manually when you are finished using it. • If you expect the drum module to be inactive for a certain length of time while connected to other audio equipment, we recommend that you turn the volume on the other equipment fully down. Alternatively, you can disable the Auto Power-Off function to ensure that the drum module stays on. NOTE • Settings for the Auto Power-Off function do not represent exact times and there may be some variation. • By default, the Auto Power-Off time is set to 30 minutes. Quickly disabling Auto Power-Off To quickly disable the Auto Power-Off function, turn on the drum module while holding down the [TRAINING] button. The function will remain off until you set a new Auto Power-Off time. Hold CAUTION When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. NOTICE The drum module automatically stores all current settings before it turns off. For this reason, please do not unplug the power adaptor until all button lights have gone out. Auto Power-Off The Auto Power-Off function automatically turns off the drum module after a certain period of inactivity. This helps to save energy should you forget to turn it off yourself. NOTE The drum module automatically stores all current settings before it turns off. Setting the Auto Power-Off Function You can set the amount of time that the Auto Power-Off function will wait before turning off the drum module. For details, see the description of the Auto Power-Off Time parameter from Menu Mode (page 53). 20 DTX400K/DTX430K/DTX450K Owner's Manual Restoring the Default Settings (Factory Set) Straight out of the box, your drum module already contains a wide range of pre-programmed drum kits and songs. These default settings-collectively known as the Factory Set-can be conveniently restored at any time if you have accidentally overwritten them or wish to delete all of your own settings. To do so, use the Factory Set function as follows. NOTICE When you restore the Factory Set as described below, any changes you have made to parameters will be lost. Before proceeding, therefore, you should ensure that they contain no irreplaceable settings. 1. Press the [ ] (Standby/On) button and verify that the drum module turns off. 2. Turn on the drum module while holding down the [VOLUME+] button and the [VOLUME-] button. Hold The drum module's lights will flash and the Factory Set will be restored.