Yamaha DTX450K Owner's Manual - Page 55
Revert to Last Power On, 8. Factory Set, parameters from Kit Mode, Song Mode, and Menu Mode
View all Yamaha DTX450K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7-7. Revert to Last Power On Steps: MENU ([KIT] + [SONG]) [7] [7] [1] [1] Setting Parameters using Menu Mode 7-8. Factory Set Steps: MENU ([KIT] + [SONG]) [7] [8] [1] [1] Using the following procedure, you can return all of the parameters from Kit Mode, Song Mode, and Menu Mode to the settings they had when you last turned on the drum module. NOTICE When you reset parameters as described below, any changes you have made to them since last turning on the drum module will be lost. Before proceeding, therefore, you should ensure that they contain no irreplaceable settings. 1. While holding the [KIT] button, press the [SONG] but- ton to activate Menu Mode. 2. Press number button [7] to select the Other Settings parameter group. 3. Press number button [7] to select the Revert to Last Power On function. • Number button [1] will light up. 4. Press number button [1]. • Number button [1] will start to flash. • If you do not wish to proceed with initialization, press the [KIT] button now to exit Menu Mode. 5. Press number button [1]. • The parameters will be initialized. Using the following procedure, you can return all of the parameters from Kit Mode, Song Mode, and Menu Mode to their default settings. NOTICE When you reset parameters as described below, any changes you have made to them will be lost. Before proceeding, therefore, you should ensure that they contain no irreplaceable settings. 1. While holding the [KIT] button, press the [SONG] but- ton to activate Menu Mode. 2. Press number button [7] to select the Other Settings parameter group. 3. Press number button [8] to select the Factory Set func- tion. • Number button [1] will light up. 4. Press number button [1]. • Number button [1] will start to flash. • If you do not wish to proceed with initialization, press the [KIT] button now to exit Menu Mode. 5. Press number button [1]. • The parameters will be initialized. NOTE You can also restore the Factory Set by turning on the drum module with the [VOLUME+] button and the [VOLUME-] button held down. See page 20 for more details. DTX400K/DTX430K/DTX450K Owner's Manual 55