Yamaha EAD10 EAD10 Owners Manual - Page 27
Connecting Headphones, Setup Guide, Hook the AC adaptor's cord around the cord
View all Yamaha EAD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4. Hook the AC adaptor's cord around the cord hook to secure it in place. CAUTION Excessive bending can damage the AC adaptor cord and create a fire hazard. Ensure, therefore, that the power cord is not bent at an extreme angle when wrapped around the hook. Setup Guide Setting Up Cord hook AC adaptor cord 5. Plug the AC adaptor's AC plug into a domes- tic power outlet. CAUTION Even when the [ ] (Standby/On) switch is in standby status (power lamp is off/display is off), electricity is still flowing to the instrument at the minimum level. When you are not using the EAD10 for a long period of time, make sure that you unplug the AC adaptor from the wall AC outlet. Power outlet AC adaptor NOTE When disconnecting the AC adaptor, turn the instrument and then carry out this procedure in reverse order. Connecting Headphones Connect the headphones to the [PHONES] jack. CAUTION Do not use headphones at high volume for an extended period of time. Doing so can cause loss of hearing. NOTE Please take note of the following if you are using open or semiopen headphones. - Volume tends to sound louder because of the sound of the drums leaking into the headphones when playing. - When recording or connected to a PA, the Click sound from the headphones may get mixed into your recording or PA system. Front panel side EAD10 Owner's Manual 23