Yamaha EAD10 EAD10 Owners Manual - Page 32
Manually Adjusting the Sensor Unit Settings, Setting Finer Adjustments
![]() |
View all Yamaha EAD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Setup Guide Setting Up the Sensor Unit Manually Adjusting the Sensor Unit Settings 1. Press the [ ] (Sensor Unit) button. The SENSOR UNIT screen appears. Press the [EXIT] button to return to the Scene screen. Mic gain Trigger gain 2. Use the buttons below " " or " " ([F1] or [F2]) to move the cursor. 3. Use the [-] or [+] buttons to adjust the value. Lower Higher Setting Finer Adjustments 1. With the SENSOR UNIT screen displayed, press the button below " " ([F2]). The SENSOR UNIT (fine adjustment) screen opens. SENSOR UNIT screen TRG SENS Sensitivity for (Trigger Sensitivity) light strokes The larger the value, the louder the sound produced when struck lightly. NOTE • If this is set too low, the Trigger sound might not be played. • If this is set too high, the snare drum or toms might trigger the bass drum Trigger Sound when hit. [L] Mic gain left Adjust the L and R settings when the volume balance between the left and right Mics is poor. NOTE [R] Mic gain right The same value is displayed in the [L] setting in the SENSOR UNIT (fine adjustment) screen and in the "MIC" setting in the SENSOR UNIT screen. SENSOR UNIT (fine adjustment) screen 28 EAD10 Owner's Manual
![](/manual_guide/products/yamaha-ead10-ead10-owners-manual-a812a3a/32.png)