Yamaha EAD10 EAD10 Owners Manual - Page 39
Creating Your Own Scene, Changing, the Reverb Type, the Effect Type, the Trigger Sound
View all Yamaha EAD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Creating Your Own Scene You can customize preset Scenes to create your own Scene. Basic Guide Creating Your Own Scene NOTE To check the Trigger Sound, turn the [TRIGGER] knob clockwise to increase the volume. Changing the Reverb Type 1. Press the button below "REV" ([F1]). The REVERB TYPE screen opens. Changing the Effect Type 1. Press the button below "EFF" ([F2]). The EFFECT TYPE screen opens. Changing the Trigger Sound Changing the Trigger Sound on the Bass Drum (Set as a Factory Default) 1. Press the button below "TRG" ([F3]). The TRIGGER INST screen opens. 2. Use the [-] or [+] but- tons to select the Reverb type you want to use. 2. Use the [-] or [+] but- tons to select the Effect type you want to use. Use the " " ([F1]) and " " ([F2]) buttons to change the tempo for tempo synced Effects. Trigger Sound name Trigger Sound number 2. Use the [-] or [+] buttons to select the number for the Trigger Sound you want to use. About the "BYPASS" In each screen, selecting "BYPASS" ([F3]) causes the corresponding knob lamps to dimly flash and the Effect not applied. Each press of the [F3] button turns the bypass setting on or off. When you select "BYPASS" while the knob is turned fully to the minimum position, the two lamps below the knob dimly flash. EAD10 Owner's Manual 35