Yamaha LPX510 MCXSP10 Manual - Page 19

Adjusting the Screen Image Displaying a Test Pattern You can project a test pattern at times such as when setting up the projector in order to correct keystone correction and to make line menu adjustments. • Crosshatch This can be used to check whether the projector is tilted or set up vertically in front of the screen. • Grayscale pattern This is used when adjusting brightness or when adjusting image quality or color tone. The adjustment is made using the line menu. Adjustments other than brightness are not possible when no image signals are being input. 1 Test Pattern Cross-hatching Gray Scale Exit 2 STANDBY/ON ESCAPE MENU IRIS SETTING PATT ESCAPE MENU PATTERN SETTING ASPECT INPUT ASPECT LIGHT INPUT HIDE Projector Remote control 3 STANDBY/ON ESCAPE MENU IRIS SETTING PATT ESCAPE MENU PATTERN SETTING ASPECT INPUT ASPECT LIGHT INPUT HIDE Projector Remote control Press the [PATTERN] button on the projector's control panel or the PATT button on the remote control. A pattern select menu will be displayed. Select a pattern. If using the projector's control panel, press the or button. If using the remote control, tilt the button vertically. Confirm the pattern selection. Press the button on the projector's control panel or the button on the remote control. 14