Yamaha LPX510 MCXSP10 Manual - Page 39
User’s Logo, On-Screen Display, may change.
View all Yamaha LPX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Using the Menu Functions User's Logo You can record your favorite image as a user's logo. A user's logo can be stored for projecting when the projector starts up and when projecting the hide screen. When a user's logo is recorded, the previous user's logo will be erased. Follow the instructions on the screen to record a user 's logo. (Default setting: ) Selection frame ESC :Return :Select :Setting [User 's Logo] Set the zoom rate Zoom rate 100% 200% 300% Record Move the selection frame so that the area of the image to be recorded is inside the frame. ESC :Return :Select :Execute Select the display ratio. • The image will be displayed in dot format while the selection frame is displayed, therefore the display size may change. • The size of the recorded image is 480 × 360 dots. • Once a user's logo has been recorded, you cannot return the logo to the default setting. • To use the stored user's logo, set "Hide Screen" to "Logo". On-Screen Display Main menu Menu Position Navigation Bar Menu Color Message Hide Screen Startup screen Function If using the projector's control panel, press the , , − and buttons to set the menu display position. If using the remote control, tilt the button horizontally and vertically. This sets the menu navigation bar to be displayed (ON) or not displayed (OFF). This selects the color of the main menu for full menus and the navigation bar to one of 4 choices. This sets whether the following message is displayed (ON) or not displayed (OFF). • Command name display when image signal, picture mode, aspect, test pattern or memory settings are retrieved. • Messages such as when no image signals are being input, when an incompatible signal is input, and when the internal temperature rises This sets the screen status when the HIDE button on the remote control is pressed. The screen status can be selected from "Black", "Blue" or "Logo". This sets whether a startup screen (an image that is projected when projection starts) is to be displayed (ON) or not displayed (OFF). When this setting is changed, turn off the power, and when the cool-down period has finished, turn the power back on again. The new setting will be applied after the power turns back on. Default setting Center ON Color 1 ON Black ON Advanced Operations 35