Yamaha LPX510 MCXSP10 Manual - Page 31

Functions for Enhancing Projection 2 Image Setup Picture Quality Color Adjustment Picture Mode Memory Save Reset Info Dynamic Reset Return Select "Memory Save" from the submenu of the "Image" menu, and then press the button on the projector's control panel or the button on the remote control. Advanced Operations ESC :Return :Select :Enter 3 STANDBY/ON ESCAPE MENU IRIS SETTING PATT ESCAPE MENU PATTERN SETTING ASPECT INPUT Projector ASPECT INPUT LIGHT HIDE Remote control [Memory] Memory1 Memory2 Memory3 Memory4 Memory5 Memory6 Return Select the memory number (1 - 6) to use for saving the settings, and then press the button on the projector's control panel or the button on the remote control. The icon for the memory number selected will change from to . If you select a memory number that already contains stored settings, the previous settings will be cleared and the current settings will be stored in their place. ESC:Return :Select :Setting Retrieving Saved Image Quality Settings S VIDEO A HDMI VIDEO B D4 INPUT MEMORY 1 2 3 4 5 6 Remote control Memory 5 Press one of the remote control memory buttons [1] to [6] corresponding to the image quality settings to be retrieved. The selected memory number will be displayed at the top-right of the screen, and the setting values will be applied to the images that are being projected. • If you press one of the remote control memory buttons [1] to [6] that has no stored memory settings, the images being projected will not change. • Memory settings that have been applied to images will be retained even when the projector's power is turned off. The same memory adjustment settings will be applied to images that are projected the next time the projector's power is turned on. • The aspect setting retrieved from memory may not be applied to the images if they are 16:9 images or if the input signal images have a particular resolution. 27