Home » Yamaha Manuals » Projectors » Yamaha LPX510 » Manual Viewer

Yamaha LPX510 MCXSP10 Manual - Page 55

Replacing Consumables, Lamp Replacement Period

Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Maintenance 4 5 Install the air filter. Install the air filter so that it faces the correct way. Install the air filter cover. Replacing Consumables This section explains how to replace the lamp. Lamp Replacement Period It is time to replace the lamp when: • The message "Lamp Replace" appears on the screen when projection starts. The message appears for 30 seconds, and disappears again after 30 seconds have passed. A message will be displayed. • The LAMP/COVER indicator flashes orange or lights red. STANDBY/ON ESCAPE MENU PATTERN SETTING ASPECT INPUT LAMP/COVER TEMP/FAN Lamp indicator flashes orange or lights red. • If the brightness and image quality is less than it was in the beginning or if flickering has increased. 52

Section	Page
IMPORTANT SAFETY INSTRUCTIONS	2
COMPLIANCE INFORMATION STATEMENT	3
Caution: Read this before operating this unit.	4
Notations used in this Owner’s Manual	5
Contents	6
Notes on Handling and Storage	7
Accessories	8
Features of the Projector	9
Basic Operations	10
Turning On the Projector	11
Connecting the Power Cord	11
Turning On the Power and Projecting Images	12
Turning Off the Projector	14
Adjusting the Screen Image	16
Adjusting the Image Size (Zoom adjustment)	16
Projection image position adjustment (Lens shift)	17
Correcting Keystone Distortion (Keystone)	18
Displaying a Test Pattern	19
Adjusting the Image Quality	21
Focus adjustment	21
Brightness adjustment (Iris adjustment)	22
Selecting the picture mode	23
Selecting the Image Aspect Ratio	24
Normal mode	25
Squeeze mode	25
Zoom mode	25
Smart Zoom mode	26
Through mode	26
Squeeze Through mode	26
Advanced Operations	27
Functions for Enhancing Projection	28
Description of Functions	28
White Level Adjustment	28
Black Level Adjustment	28
Input Level Adjustment	28
Contrast Adjustment	28
Absolute Color Temperature and Flesh Tone Adjustment	29
RGB adjustment	29
Saving and Retrieving Image Quality Settings (Memory Save)	30
Settings that can be saved in memory	30
Storing image quality settings	30
Retrieving Saved Image Quality Settings	31
Using the Menu Functions	32
List of Menus	32
\	34
Picture Quality	34
Color Adjustment	35
Picture Mode	35
Memory Save	35
Auto Setup	35
Reset	35
\	36
Signal	36
Screen	37
Operation	38
User’s Logo	39
On-Screen Display	39
Input Signal	40
Language	40
Reset	40
\	40
\	40
Lamp-Hours Reset	40
Memory Reset	40
All Reset	40
Using the Menus	41
Displaying and Operating Full Menus	41
Displaying and Operating Line Menus	42
Troubleshooting	44
When Having Some Trouble	45
When the Indicators Provide No Help	47
Problems relating to images	47
Problems when projection starts	51
Problems with the remote control	51
Appendices	52
Maintenance	53
Cleaning	53
Cleaning the Projector Case	53
Cleaning the Lens	53
Cleaning the Air Filter	54
Removing the Air Filter	54
Replacing Consumables	55
Lamp Replacement Period	55
Replacing the Lamp	56
Resetting the Lamp Operating Time	58
If vertical stripe interference appears in the projected images	59
Optional Accessories	61
List of Supported Signal Resolutions	62
Component Video/RGB Video	62
Composite Video/S-Video	62
Analog-RGB signals/signals input to the HDMI port	63
Range of compatible formats for HDMI port input signals	63
Specifications	64
Appearance	65
Part Names and Functions	66
Front/Top	66
Control Panel	67
Rear	68
Base	68
Remote Control	69
Glossary	70
Setup Guide	74
Before Using the Remote Control	75
Inserting the batteries and replacement period	75
Using the remote control and remote operating range	76
Setup	77
Screen Size and Setting-up Distance	77
Setting-up Methods	78
Connecting to a home theater system	79