Yamaha LPX510 MCXSP10 Manual - Page 21
Adjusting the Image Quality, Focus adjustment
View all Yamaha LPX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Adjusting the Image Quality The quality of the screen images can be adjusted as follows. Focus adjustment 1 2 STANDBY/ON ESCAPE PATTERN ASPECT MENU SETTING INPUT ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU Projector Remote control STANDBY/ON ESCAPE MENU IRIS SETTING PATT ESCAPE MENU PATTERN SETTING ASPECT INPUT ASPECT LIGHT INPUT HIDE Projector Remote control Press the [SETTING] button on the projector's control panel or the FOCUS button on the remote control. An adjustment icon will be displayed over the image during projection. The adjustment mode changes as follows each time the [SETTING] button on the projector's control panel is pressed. Zoom → Focus → Iris Adjust the focus. If using the projector's control panel, press the or button to adjust the image size. If using the remote control, tilt the button to adjust the image size. Adjustment is also possible while a test pattern is being projected. 3 STANDBY/ON ESCAPE PATTERN ASPECT MENU SETTING INPUT ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU Projector Remote control Exit adjustment mode. Press the [ESCAPE] button on the projector's control panel or the FOCUS button on the remote control. When the electronic focus lock is set to "ON", the projection size cannot be adjusted. The symbol will be displayed at this time. To carry out adjustments, change the focus lock setting to "OFF". (p.34) 16