Yamaha LPX510 MCXSP10 Manual - Page 24
Selecting the Image Aspect Ratio, Press the [ASPECT] button on the, projector's control panel or
View all Yamaha LPX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Basic Operations Adjusting the Image Quality Selecting the Image Aspect Ratio This selects the ratio between the height and width of the projected images. If the input signal includes aspect ratio information, the projector's automatic mode will detect this information and use it to automatically change the aspect ratio to the optimum ratio. • Automatic mode can only be set when signals are being input to the VIDEO, S VIDEO, D4 or HDMI port. When such signals are projected in automatic mode, the projector switches to the optimum aspect ratio depending on the signal as shown below. • For 4:3 input signals → Normal • For input signals recorded in squeeze mode → Squeeze • For letterbox input signals → Zoom * If the connected equipment is not EIAJ-compliant, the signals will be projected in Normal mode. The default settings for each connection port are as follows. • VIDEO, S VIDEO, D4 and HDMI ports • INPUT A and INPUT B ports → Auto → Normal 1 2 ESCAPE MENU ESCAPE MENU PATTERN ASPECT SETTING INPUT ASPECT LIGHT INPUT HIDE Projector S VIDEO A HDMI Remote control Press the [ASPECT] button on the projector's control panel or the ASPECT button on the remote control. The select (Resize) menu will be displayed. Resize Auto Normal Squeeze Zoom Through Squeeze Through Smart Zoom Select the aspect mode. If using the projector's control panel, press the or button to select the aspect Mode, and press the button to confirm the selection. If using the remote control, tilt the button vertically to select the aspect Mode, and press the button to confirm the selection. 19