Yamaha LPX510 MCXSP10 Manual - Page 35

Using the Menu Functions Color Adjustment If the picture mode is set to "PC", "Color Adjustment" cannot be selected. Main menu Abs. Color Temp. *2 RGB *1 Function •Abs. Color Temp. : This adjusts the overall tints of the images in accordance with the images being projected. (p.25) •Flesh Tone : This adjusts the flesh tones of people who appear in the images. (p.25) This lets you adjust the offset, gain and gamma for each of the R/G/B color components. (p.25) Default setting 7000K (Varies depending on country of purchase) (Depends on picture mode) 5 (Depends on picture mode) Offset R/G/B: 0 Gain R/G/B: 0 Gamma R/G/ B: 2.2 *1 The setting values are stored separately for each image source and signal type. *2 The settings are stored separately for each image source and the picture mode setting. Picture Mode *1 The picture mode can be selected from six different settings in accordance with the images being projected. (Default setting: Dynamic) (p.18) *1 The setting values are stored separately for each image source and signal type. Memory Save This can be used to save the current "Image" and "Setup" configuration menu settings and the aspect. (p.26) Auto Setup *1 (Setting is only possible when computer signals are being input.) This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts images to their optimum condition when the input signal is changed. (Default setting: ON) *1 The setting values are stored separately for each image source and signal type. Reset Returns all adjustment values in the "Image" menu (other than the values stored using the "Memory Save" command) to their default values. "Memory Save" is reset using the "Memory Reset" command. (p.36) Advanced Operations 31