Yamaha LPX510 MCXSP10 Manual - Page 22
Brightness adjustment (Iris adjustment), Select a setting value., Exit adjustment mode. - projector lamps
View all Yamaha LPX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Basic Operations Adjusting the Image Quality Brightness adjustment (Iris adjustment) The brightness of the images can be adjusted. When projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting. 1 STANDBY/ON ESCAPE PATTERN MENU SETTING ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU ASPECT INPUT Projector Remote control Press the [SETTING] button on the projector's control panel or the IRIS button on the remote control. The line menu will be displayed over the images that are being projected. The adjustment mode changes as follows each time the [SETTING] button on the projector's control panel is pressed. Zoom → Focus → Iris 2 STANDBY/ON ESCAPE MENU IRIS SETTING PATT ESCAPE MENU PATTERN SETTING ASPECT INPUT ASPECT LIGHT INPUT HIDE Projector Remote control Select a setting value. If using the projector's control panel, press the - or + button. If using the remote control, tilt the button horizontally. Adjustment is also possible while a test pattern is being projected. 3 STANDBY/ON ESCAPE PATTERN ASPECT MENU SETTING INPUT ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU Projector Remote control Exit adjustment mode. Press the [ESCAPE] button on the projector's control panel or the IRIS button on the remote control. The Lamp Power menu can also be used to make the adjustment. (p.34) 17