Yamaha LPX510 MCXSP10 Manual - Page 58
Resetting the Lamp Operating Time, Select Lamp Hours Reset from
View all Yamaha LPX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Maintenance Resetting the Lamp Operating Time The lamp operating time must always be reset after the lamp has been replaced with a new one.The projector has a built-in lamp operating time counter. A replacement message is displayed when the counter reaches a certain amount. Do not reset the lamp operating time except after the lamp has been replaced, otherwise the lamp replacement period will not be indicated correctly. 1 2 3 STANDBY/ON ESCAPE PATTERN MENU SETTING ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU ASPECT INPUT Projector Remote control STANDBY/ON ESCAPE MENU IRIS SETTING PATT ESCAPE MENU PATTERN SETTING ASPECT INPUT ASPECT LIGHT INPUT HIDE Projector Remote control Image Setup Info Lamp-Hours Reset Memory Reset All Reset Reset Return Press the [STANDBY/ON] button on the projector's control panel or the button on the remote control. Press the [MENU] button on the projector's control panel or the MENU button on the remote control. The menu will be displayed. Select "Lamp Hours Reset" from the "Reset" menu. Press the button on the projector's control panel of the button on the remote control. 4 :Return :Select :Enter [Lamp-Hours Reset] Execute Yes No :Return -,+:Select :Execute Reset the lamp operating time. Select "Yes", and then press the button on the projector's control panel of the button on the remote control. Appendices 55